Livrare mașină de zgură de aluminiu pentru clientul din Tanzania

Livrare mașină de zgură de aluminiu pentru clientul din Tanzania

Dated on 16th December 2022, a fost finalizată încărcarea containerelor pentru clientul din Tanzania.

Timpul de producție este doar 25 zile de la comandă până la livrare.

Loc de muncă bun, Stea luminoasa! Sprijinul dumneavoastră fantastic este întotdeauna apreciat, Dumnezeul nostru!

Mașină fierbinte de zgură de aluminiu is also known as the dross processing machine (DPM), which is suitable for all aluminum processing factories that use metal aluminum as raw material and melt metal aluminum as the production process, such as electrolytic aluminum factories, fabrici de aliaje de aluminiu, aluminum casting factories and extrusion factories.

This machine is applied to separate aluminum from aluminum dross generated in the production process of aluminum melting furnace, holding furnace and alloy centralized melting furnace, so that the aluminum metal content in the aluminum dross is reduced from 40-60% to less than 5%.

It is a typical material-saving and energy-saving machine.

Compared with the cold processing method of aluminum dross, the equipment has the advantages of less metal burning loss, energy saving and environmental protection, a short production process and less equipment investment.

Features of aluminum dross machine

1. Use hot dross for direct processing, saving fuel and simplifying the production process;

2. Mechanical stirring and lifting are adopted, which is firm and has a low failure rate;

3. Simple operation and convenient maintenance;

4. The stirring time can be adjusted according to the production, and the recovery rate of metal aluminum is high;

5. The equipment occupies a small area, less investment and a high return rate;

6. With dust collector for pollution control (Water spraying or cyclone type);

7. Stirring evenly, and minimize the burning loss of metal aluminum;

8. Separate structure of machine (Top and bottom part of aluminum dross machine), easy for transportation, installation and maintenance.

Brightstar Aluminium Machinery oferă o soluție largă pentru procesarea și reciclarea deșeurilor de aluminiu.

Soluția include extracția de zgură fierbinte, separating and recovery as well as dross cooling, strivire, măcinarea și cernerea.

Consult with our technical team for recommendations and advice on the right dross processing operation for your aluminum project and see how to make a profit from them.