તાંઝાનિયા ગ્રાહક માટે એલ્યુમિનિયમ ડ્રોસ મશીન ડિલિવરી

તાંઝાનિયા ગ્રાહક માટે એલ્યુમિનિયમ ડ્રોસ મશીન ડિલિવરી

Dated on 16th December 2022, તાંઝાનિયા ગ્રાહક માટે કન્ટેનર લોડિંગ પૂર્ણ થયું હતું.

ઉત્પાદન સમય માત્ર છે 25 ઓર્ડરથી ડિલિવરી સુધીના દિવસો.

સારુ કામ, તેજસ્વી તારો! તમારા વિચિત્ર સમર્થનની હંમેશા પ્રશંસા કરવામાં આવે છે, અમારા ભગવાન!

હોટ એલ્યુમિનિયમ ડ્રોસ મશીન is also known as the dross processing machine (ડીપીએમ), which is suitable for all aluminum processing factories that use metal aluminum as raw material and melt metal aluminum as the production process, such as electrolytic aluminum factories, એલ્યુમિનિયમ એલોય ફેક્ટરીઓ, aluminum casting factories and extrusion factories.

This machine is applied to separate aluminum from aluminum dross generated in the production process of aluminum melting furnace, holding furnace and alloy centralized melting furnace, so that the aluminum metal content in the aluminum dross is reduced from 40-60% to less than 5%.

It is a typical material-saving and energy-saving machine.

Compared with the cold processing method of aluminum dross, the equipment has the advantages of less metal burning loss, energy saving and environmental protection, a short production process and less equipment investment.

Features of aluminum dross machine

1. Use hot dross for direct processing, saving fuel and simplifying the production process;

2. Mechanical stirring and lifting are adopted, which is firm and has a low failure rate;

3. Simple operation and convenient maintenance;

4. The stirring time can be adjusted according to the production, and the recovery rate of metal aluminum is high;

5. The equipment occupies a small area, less investment and a high return rate;

6. With dust collector for pollution control (Water spraying or cyclone type);

7. Stirring evenly, and minimize the burning loss of metal aluminum;

8. Separate structure of machine (Top and bottom part of aluminum dross machine), easy for transportation, installation and maintenance.

Brightstar Aluminum Machinery offers a wide solution for aluminum dross processing and recycling.

The solution includes hot dross extraction, separating and recovery as well as dross cooling, crushing, grinding and sieving.

Consult with our technical team for recommendations and advice on the right dross processing operation for your aluminum project and see how to make a profit from them.