தான்சானியா வாடிக்கையாளருக்கு அலுமினியம் ட்ராஸ் மெஷின் டெலிவரி
தான்சானியா வாடிக்கையாளருக்கு அலுமினியம் ட்ராஸ் மெஷின் டெலிவரி
தான்சானியா வாடிக்கையாளருக்கு அலுமினியம் ட்ராஸ் மெஷின் டெலிவரி
Dated on 16th December 2022, தான்சானியா வாடிக்கையாளருக்கான கொள்கலன் ஏற்றுதல் முடிந்தது.
உற்பத்தி நேரம் மட்டுமே 25 ஆர்டரில் இருந்து டெலிவரி வரை நாட்கள்.
நல்ல வேலை, பிரகாசமான நட்சத்திரம்! உங்கள் அருமையான ஆதரவு எப்போதும் பாராட்டப்படும், எங்கள் கடவுள்!
சூடான அலுமினிய ட்ராஸ் இயந்திரம் is also known as the dross processing machine (டிபிஎம்), which is suitable for all aluminum processing factories that use metal aluminum as raw material and melt metal aluminum as the production process, such as electrolytic aluminum factories, aluminum alloy factories, aluminum casting factories and extrusion factories.
This machine is applied to separate aluminum from aluminum dross generated in the production process of aluminum melting furnace, holding furnace and alloy centralized melting furnace, அதனால் அலுமினிய ட்ராஸில் உள்ள அலுமினிய உலோக உள்ளடக்கம் குறைகிறது 40-60% விட குறைவாக 5%.
It is a typical material-saving and energy-saving machine.
அலுமினிய ட்ராஸின் குளிர் செயலாக்க முறையுடன் ஒப்பிடும்போது, the equipment has the advantages of less metal burning loss, ஆற்றல் சேமிப்பு மற்றும் சுற்றுச்சூழல் பாதுகாப்பு, ஒரு குறுகிய உற்பத்தி செயல்முறை மற்றும் குறைந்த உபகரண முதலீடு.
Features of aluminum dross machine
1. Use hot dross for direct processing, saving fuel and simplifying the production process;
2. Mechanical stirring and lifting are adopted, which is firm and has a low failure rate;
3. Simple operation and convenient maintenance;
4. The stirring time can be adjusted according to the production, and the recovery rate of metal aluminum is high;
5. The equipment occupies a small area, less investment and a high return rate;
6. With dust collector for pollution control (Water spraying or cyclone type);
7. Stirring evenly, and minimize the burning loss of metal aluminum;
8. Separate structure of machine (Top and bottom part of aluminum dross machine), easy for transportation, installation and maintenance.
பிரைட்ஸ்டார் அலுமினியம் மெஷினரி அலுமினிய ட்ராஸ் செயலாக்கம் மற்றும் மறுசுழற்சிக்கு ஒரு பரந்த தீர்வை வழங்குகிறது.
தீர்வு சூடான துகள் பிரித்தெடுத்தல் அடங்கும், பிரித்தல் மற்றும் மீட்பு அத்துடன் துளி குளிர்ச்சி, நசுக்குகிறது, அரைத்து சல்லடை.
Consult with our technical team for recommendations and advice on the right dross processing operation for your aluminum project and see how to make a profit from them.