ಅಲ್ಯೂಮಿನಿಯಂ ಪ್ರೊಫೈಲ್ ಶಾಟ್ ಬ್ಲಾಸ್ಟಿಂಗ್ ಯಂತ್ರದ ಸ್ಥಾಪನೆ ಮತ್ತು ಕಾರ್ಯಾಚರಣೆಯ ಮುನ್ನೆಚ್ಚರಿಕೆಗಳು

ಅಲ್ಯೂಮಿನಿಯಂ ಪ್ರೊಫೈಲ್ ಶಾಟ್ ಬ್ಲಾಸ್ಟಿಂಗ್ ಯಂತ್ರದ ಸ್ಥಾಪನೆ ಮತ್ತು ಕಾರ್ಯಾಚರಣೆಯ ಮುನ್ನೆಚ್ಚರಿಕೆಗಳು

ಅಲ್ಯೂಮಿನಿಯಂ ಪ್ರೊಫೈಲ್ ಶಾಟ್ ಬ್ಲಾಸ್ಟಿಂಗ್ ಯಂತ್ರ installation and operation Dos and don’ts

What is aluminium profile shot blasting machine?

Aluminium profile shot blasting machine is the special equipment for the surface of the aluminum profiles, through the shot blasting treatment, which can remove the die lines and scratches of aluminum profiles, ನೋಟ ಗುಣಮಟ್ಟ ಮತ್ತು ಬಣ್ಣ ಅಂಟಿಕೊಳ್ಳುವಿಕೆಯನ್ನು ಸುಧಾರಿಸಿ, ಇದರಿಂದ ಉತ್ಪನ್ನದ ಗುಣಮಟ್ಟವನ್ನು ಸುಧಾರಿಸುವ ಫಲಿತಾಂಶವನ್ನು ನಾವು ಪಡೆಯಬಹುದು.

In aluminium profile shot blasting machine installation, comply with the following dos and don’ts

1. The levelness and weight must meet the drawing requirement as the main machine is in its place.

2. The rail type or catenary type or roll table type should be from inside to the outside of the equipment

3. The parts should be installed from top to bottom

4. In the commissioning, should pre-test for the parts, after that, then all can work.

5. Must pay more attention to the control electrical cabinet display, it is normal or not?

6 The operator should inspect the equipment daily

Checking items include: lubricating parts and mechanical parts, lubricating parts such as hydraulic, gear, and bearing lubricator, chain. Mechanical parts such as the wear of rotating parts, wearing parts wear.

7. Lubrication parts should ensure timely lubricated

8. The wearing parts should be changed and replaced timely