Contact us

Skype: brightstaralu


Home > dross processing machine, aluminum dross processing mahcine

dross processing press

There will be lots of aluminum dross in the melting process, which (residue) contains large amount of aluminum with the residue removal from the furnace. If we sell them with simple processing, that will cause a great waste and also it pollutes the environment.  But if we use rotary furnace, grinding separation by cold ash, pressing and labor  ash processing,  these methods are not only low recovery rate, but also a big waste and harmful to the environment.  So it is particularly important to maximize the recovery of aluminum from the aluminum ash.


Aluminum dross processing machine is a machine adopts foreign advanced technology, no need for any fuel, fast recovery, which can made full use of the aluminum ash and scraps with high aluminum contents and replace the old way for recycling by labor. This machine can separate the aluminum and ash by one time, and has been very high efficiency for recycling rate(90% of aluminum from the ashes),short working time (10 minutes for finish the separation of aluminum and ashes),low electricity consumption,enviromental friendly(with dirt and smoke ventilation equipment)  features. The whole machine is fully automatic in mechanical working way and its efficiency is increased 15% comparing with the manual way.


For more information of aluminum dross processing machine, you can visit for more information.